Axis Communications Q1604-E Day/Night Outdoor Network Camera 0463-001

Image Sensor Device 1/3" Progressive scan RGB CMOS
Lens DC-iris, IR corrected, CS-mount
2.8 - 8 mm varifocal lens at F/1.2; 80 - 34° horizontal angle of view
Support for P-Iris lens
Day/Night Automatically removable infrared-cut filter
Minimum Illumination Color: 0.4 lux at F/1.2
B&W: 0.06 lux at F/1.2 with dynamic capture
Shutter time 1/29500 s to 2 s, 1/231 s to 1/44 s with dynamic capture
Video
Video Compression H.264 baseline and main profile (MPEG-4 Part 10/AVC)
Motion JPEG
Resolution 1280 x 960 (1 MP) to 160 x 90
Frame Rate H.264 30 fps in 60 Hz capture mode, 25 fps in 50 Hz capture mode
Frame Rate Motion JPEG 30 fps in 60 Hz capture mode, 25 fps in 50 Hz capture mode
Video Streaming Multiple, individually configurable streams in H.264 and Motion JPEG
Controllable frame rate and bandwidth
VBR/CBR H.264
Image Settings Compression, color, brightness, sharpness, contrast, white balance, exposure control, exposure zones, backlight compensation, fine tuning of behavior at low light, wide dynamic range - dynamic contrast, fine tuning of behavior at low light
WDR: Up to 120dB (0.4 - 400,000 lux) depending on scene
Text and image overlay, privacy mask, mirroring of images
Audio
Audio Streaming Two-way
Audio Compression AAC LC 8/16 kHz
G.711 PCM 8 kHz
G.726 ADPCM 8 kHz
Configurable bit rate
Audio Input/Output External microphone input or line input, line output
Network
Security Password protection, IP address filtering, digest authentication, user access log, IEEE 802.1X network access control, HTTPS encryption
Supported Protocols IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
System Integration
Application Programming Interface Open API for software integration, including the ONVIF
Application Platform from Axis Communication
Support for Axis Video Hosting System (AVHS) with One-Click Camera connection
Intelligent Video Video motion detection, active tampering alarm, audio detection
Support for Axis Camera Application Platform enabling installation of additional applications
Alarm Triggers Intelligent video, edge storage events, external input
Alarm Events File upload via FTP, HTTP and email
Notification via email, HTTP and TCP
External output activation
Video and audio recording to local storage
Pre- and post-alarm video buffering
Installation Software Focus assistant, remote back focus, pixel counter
General
Casing Camera: Metal (zinc)
IP66- and NEMA 4X-rated, IK10 impact resistant aluminum enclosure with integrated dehumidifying membrane Color: white NCS S 1002-B
Processor ARTPEC-4
Memory 256 MB RAM, 128 MB Flash
Power PoE IEEE 802.3af maximum 12.95 W or High PoE maximum 25.5 W
Connectors RJ-45 10BASE-T/100BASE-TX PoE
Terminal block for 1 alarm input and 1 output
3.5 mm mic/line in, 3.5 mm line out
Edge Storage SD/SDHC memory card slot (card not included) Support for recording to network share (Network Attached Storage or file server) 1
Approvals EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC Part 15 Subpart B Class B, ICES-003, Class B, VCCI Class B, C-tick AS/NZS CISPR 22, KC, EN 60950-1, IEC 60950-1, IEC 60529 IP66, NEMA 250 Type 4X, IEC 62262, IK10, IEC60950-22, IEC 60068-2-6, IEC 60068-2-27, EN 50121-4/IEC 62236
Operating Conditions -22 to 122°F (-30 to 50°C) with PoE; down to -40 ºF (-40 ºC) with High PoE
Arctic Temperature Control enables camera start-up at temperatures as low as -40 ºF (-40 ºC ) with High PoE
Dimensions (DxWxH) 6 x 3.1 x 1.8" (151 x 78 x 46 mm)
Weight 6.8 lb (3.1 kg)